widely used pneumatic hydraulic pump pump overseas market forshipbuilding

latest_products

Instruções de bomba de teste de pressão manual

Bomba de teste de pressão hidráulica / hidro / hidrostática

Máquina de teste de medição externa do cilindro do gás com jaquetas de água

Bomba de injeção de reagente química pneumática

Informações sobre o produto
feedback

Company Advantages
1. Suncenter air powered hydraulic pump is an integrated result of multiple technologies. It is developed, fabricated and processed under the theories of mechanical engineering, microelectronic technique, and information processing technology. This product has the characteristics of explosion proof
2. The product can meet varied demands of our clients and is being used more and more widely in the global market. This product can be installed at any predetermined pressure
3. The quality control technicians perform quality control checks on every article before shipment. Its operation is safe with no heat, flame or spark risk

Compressed Air Driven Liquid Booster Pump-DGM/DGG/DGGD Series

We offer the most complete range of Air driven liquid pump models in the industry measured for:

Capability of ultimate pressure, flow or output horsepower.

Suncenter widely used pneumatic hydraulic pump overseas market forshipbuilding-1

Compatibility with a broad variety of liquids, such as oil, water and chemical applications.

SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.

SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don’t reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.

Suncenter widely used pneumatic hydraulic pump overseas market forshipbuilding-2

DGM Series Liquid Pumps(Single acting, single air drive head)

Suncenter widely used pneumatic hydraulic pump overseas market forshipbuilding-3

◪ They have aluminum bodies, with oxidation treatment and wetted materials of carbon steel or stainless steel, which depending on different service liquid. Material of stainless steel, making them an excellent choice of water application.
◪ Portable design.
◪ High quality seals, long service life available
◪ Easy to install, operate and maintenance.
◪ Explosion proof and no electrical power required.

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MaxFlow rate(L/min)**
DGM1	1:1	2-8 bar	1XPL	8	NPT1	NPT1/2	20.50
DGM4	4:1	2-8 bar	4XPL	32	NPT1	NPT1/2	15.36
DGM10	10:1	2-8 bar	10XPL	80	NPT3/4	NPT1/2	7.15
DGM16	16:1	2-8 bar	16XPL	128	NPT /2	NPT 1/2	4.59
DGM30	30:1	2-8 bar	30>XPL	240	NPT 1/2	NPT 3/8	2.53
DGM44	44:1	2-8 bar	44XPL	352	NPT 3/8	NPT 3/8	1.41
DGM64	64:1	2-8 bar	64XPL	512	NPT 3/8	NPT 3/8	0.95
DGM100	100:1	2-8 bar	100XPL	800	NPT 3/8	NPT 3/8	0.64
DGM170	170:1	2-8 bar	170XPL	1360	NPT 3/8	M14*1.5	0.37

DGG Series Liquid Pumps(Single acting, single air drive head)

Suncenter widely used pneumatic hydraulic pump overseas market forshipbuilding-4

◪ DGG pumps have aluminum bodies and wetted materials of stainless steel or carbon steel ,which depends on different service liquid. Materials of stainless steel, make them an excellent choice of water application. High quality seals, long service life available.

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92
DGG130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14X1.5	1.47
DGG175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14X1.5	1.14
DGG255	255:1	2-8 bar	255XPL	2040	NPT1/4	M14X1.5	0.75
DGG400	400:1	2-8 bar	400XPL	3200	NPT1/4	M14X1.5	0.48
DGG510	510:1	2-8 bar	510XPL	4080	NPT1/4	M14X1.5	0.65
DGG800	800:1	2-8 bar	800XPL	6400	NPT1/4	M14X1.5	0.42

DGGD Series Liquid Pumps(Double acting, single air drive head)

Suncenter widely used pneumatic hydraulic pump overseas market forshipbuilding-5

◪ They are characterized by the same features as the DGG pumps single acting, single air drive head types, but they have less pulsations and deliver approx. 50 % more flow.

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13
DGGD130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14*1.5	2.40
DGGD175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14*1.5	1.81
DGGD255	255:1	2-8 bar	255XPL	2040	NPT1/4	M14*1.5	1.23
DGGD400	400:1	2-8 bar	400XPL	3200	NPT1/4	M14*1.5	0.79

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Pressures to 640Mpa (6400 bar)
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant

video

Company Features
1. Dongguan Suncenter Fluid Control Equipment Co., Ltd has now obtained a sound reputation as a professional air powered hydraulic pump producer and supplier in domestic markets.
2. The quality of pneumatic hydraulic pump is strictly controlled from pneumatic hydraulic pump high pressure.
3. Suncenter desires to be a leading enterprise that provides high quality service for customers. Inquire!

w******e

The air powered hydraulic pump we produce is fine in workmanship, reasonable in design, excellent in performance and stable in quality, and is a trustworthy high-quality product.

w******m

We strictly control air powered hydraulic pump every link from raw material selection, production and processing to finished product delivery, and do not miss every detail to ensure that all air powered hydraulic pump finished products have excellent quality.

q******u

Constantly upgrade and renew production equipment and production lines, and explore technologies and processes to ensure that the overall quality of pneumatic hydraulic pump high pressure produced is more reliable.

y******j

Actively study and introduce world-class management theories, establish a comprehensive quality management system, and implement the concept of product quality control throughout the entire process of product design, production, inspection, and use, and carry out quality control with full participation, It is better to ensure that the pneumatic hydraulic pump produced is always of consistent quality and excellent quality.

k******s

Have a professional team, concentrate on the quality management of materials, and strictly control the quality of air powered hydraulic pump from the source, not only that, air powered hydraulic pump After the production is completed, the quality inspection team specially established by the company will conduct inspections , to ensure its high quality and excellent quality.

c******m

Suncenter is known as the top manufacturer in producing the high quality product. It features high energy efficiency and cost savings

Mensagem do produto

*Nome

Telefone

*Correio electrónico

*Conteúdo