stable hydraulic test bench gas factory price for safety valve calibration

latest_products

Instruções de bomba de teste de pressão manual

Bomba de teste de pressão hidráulica / hidro / hidrostática

Máquina de teste de medição externa do cilindro do gás com jaquetas de água

Bomba de injeção de reagente química pneumática

Informações sobre o produto
feedback

Company Advantages
1. Visual inspection for Suncenter nitrogen gas booster is of importance. It is inspected by workers in terms of blemishes, dents, bubbles, stains, and other production anomalies. It requires no electrical or mechanical drive connections
2. This product stays warm in the winter and cool in the summer by sucking up moisture. It's well worthy of considering. The product can be mounted in any position
3. It is absolute that the quality of this product is assured by professional quality check staff. It can be used for a broad variety of liquids, such as oil, water, and chemical
4. This product is tested by our quality controllers to assure its high performance at clients. This product brings no vibration and noise

Gas booster pump system

Suncenter - Gas booster systems are compact and delicacy solution tailored to customer specific requirements with gas boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator.

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

Suncenter - Pneumatic booster system are used for oil free compression of clean shop air as well as industrial gases like Argon, Helium, Oxygen, Hydrogen and Nitrogen,CO2, etc..Driven air from 3 bar to 8 bar (from air compressor).

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option.

Suncenter DGS Series Pneumatic (Air driven) Gas Booster Pump System

Suncenter stable hydraulic test bench factory price for safety valve calibration-1

DGS booster system = booster pump+ following valves, gages, and parts

Suncenter stable hydraulic test bench factory price for safety valve calibration-2

The hottest selling- model A and model C cabinet picture

Suncenter stable hydraulic test bench factory price for safety valve calibration-3

◪ The standard gas booster pumps system including following parts:
◪ Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)
◪ Stainless steel (carbon steel) material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGA02	2：1	1.0	16	16	2bar-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGS-DGA05	5：1	0	40	40	2bar-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGS-DGA06	6：1	2.0	48	48	2bar-8 bar	6XPL	1/2 / 1/2	360(at PA of 10 bar )
DGS-DGA10	10：1	3.5	80	80	2bar-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGS-DGA15	15：1	3.5	120	120	2bar-8 bar	15XPL	3/8/ 3/8	190(at PA of 10 bar )
DGS-DGA25	25：1	7.0	200	200	2bar-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGS-DGA40	40：1	10	320	320	2bar-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGS-DGA60	60：1	20	480	480	2bar-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGS-DGA100	100：1	25	800	800	2bar-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )

Technical specification for DGS-DGD Series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGD10	10:1	3.5	80	80	2bar-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGS-DGD15	15:1	5	120	120	2bar-8 bar	15XPL+ PA	3/8/3/8	350 (at PA of 6 bar )
DGS-DGD25	25:1	10	200	200	2bar-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGS-DGD40	40:1	15	320	320	2bar-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGS-DGD60	60:1	25	480	480	2bar-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGS-DGD100	100:1	35	800	800	2bar-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )
DGS-DGD130	130:1	50	1040	1040	2bar-8 bar	130XPL+ PA	1/4/M14*1.5	180(at PA of 60 bar )

Technical specification for DGS-2DGD Series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-2DGD10	10:1	3	80	80	2bar-8 bar	10XPL+ PA	1/2 / 1/2	980(at PA of 6 bar )
DGS-2DGD25	25:1	6	200	200	2bar-8 bar	25XPL+ PA	3/8 / 3/8	560(at PA of 10 bar )
DGS-2DGD40	40:1	25	320	320	2bar-8 bar	40XPL+ PA	3/8 / 3/8	480(at PA of 40 bar )
DGS-2DGD60	60:1	30	480	480	2bar-8 bar	60XPL+ PA	3/8 / 3/8	320(at PA of 40 bar )

Technical specification for DGS-DGT Series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGT15	15:1	0.1	56	120	2-8 bar	15XPL	3/8/ 1/4	230(at PA of 8 bar )
DGS-DGT25	25:1	0.1	10	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGS-DGT7/25	25:1	5	56	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGS-DGT40	40:1	0.1	10	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGS-DGT15/40	40:1	5	120	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGS-DGT60	60:1	0.1	10	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGS-DGT15/60	60:1	6	120	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGS-DGT100	100:1	0.1	10	800	2-8 bar	100XPL	3/8/ 1/4	63(at PA of 8 bar )

Technical specification for DGS-2DGT series:

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-2DGT7/15	15:1	4	56	120	2bar-8 bar	15XPL	3/8 / 3/8	430(at PA of 10 bar )
DGS-2DGT7/25	25:1	5	56	200	2bar-8 bar	25XPL	3/8 / 3/8	300(at PA of 10 bar )
DGS-2DGT15/40	40:1	7	120	320	2bar-8 bar	40XPL	3/8 / 3/8	180(at PA of 10 bar )
DGS-2DGT15/60	60:1	7	120	480	2bar-8 bar	60XPL	3/8 / 3/8	120(at PA of 10 bar )

Suncenter stable hydraulic test bench factory price for safety valve calibration-4

Suncenter stable hydraulic test bench factory price for safety valve calibration-5

◪ DGS series gas boosters working pictures

Suncenter stable hydraulic test bench factory price for safety valve calibration-6

DGS-DGD40 gas booster system for nitrogen gas spring filling

Suncenter stable hydraulic test bench factory price for safety valve calibration-7

DGS-DGT series gas boosters for gas cylinder transfer and filling

video

Company Features
1. All our hydraulic test bench are cutting-edge in this industry. Suncenter is more advanced technically than other enterprises.
2. Suncenter actively presents high-end abilities.
3. Suncenter unremittingly boosts technology and enhance the quality of nitrogen pumps. Suncenter devotes ourselves into manufacturing gas booster compressor with favored price with our dedication. Check it!

a******v

Suncenter gas booster compressor has been evaluated by process. It has been tested in terms of color, color fastness (friction test), and safety of accessories. With user interface design, the product has a simple and refreshing operation

z******k

Suncenter nitrogen pumps goes through elaborate design steps. They are problem definition, basic need definition, material analysis, detailed design, and preparation of drawing. Its cooling system can be designed with a water-cooled or air-cooled type

i******z

Suncenter nitrogen gas booster is always carefully packaged before shippment. Additional information about the warranty, safety and care of the product is also included in the packaging. Constructed with aluminum materials, it has a robust and hard structure

h******i

Suncenter gas booster compressor is a product developed by our R&D team. They strive to produce light products with good thermal convection properties to increase product durability. This product can highlight the differences and features of printed things

f******a

Once the Suncenter hydraulic test bench production is completed, the quality assessment will be carried out. We will strictly check fiber strength, water shrinkage, colorfastness, weaving strength and other parameters. The product is developed with completely independent intellectual property rights

g******b

The product has no potential risks of electrical shock. It has passed ground continuity testing which can prevent unsuitable current from creating and flows to the earth. It is characterized by powerful human-computer interaction function with Ethernet and USB communication interface

Mensagem do produto

*Nome

Telefone

*Correio electrónico

*Conteúdo