safe booster pump price liquid manufacturers for safety valve calibration

latest_products

Instruções de bomba de teste de pressão manual

Bomba de teste de pressão hidráulica / hidro / hidrostática

Máquina de teste de medição externa do cilindro do gás com jaquetas de água

Bomba de injeção de reagente química pneumática

Informações sobre o produto
feedback

Company Advantages
1. The production of Suncenter liquid co2 pumps is adjusted to meet the needs of customers. There is no heat generated during liquid transfer
2. The product has been universally recognized with a bright development prospect. The product is consistently recognized as a reliable one in the industry
3. The product has the desired safety. It does not contain any harmful, toxic, and skin-irritant chemicals which may cause skin allergies. It can be used for a broad variety of liquids, such as oil, water, and chemical

Compressed Air Driven Liquid Gas Booster Pump-DGG/DGGD Series

SUNCENTER pumps are air driven at a drive air pressure of 2 to 10bar (29 to145 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal outlet pressure can be calculated.

Suncenter liquid booster pump price manufacturers for safety valve calibration-1

DGG Series Liquid Gas Booster Pumps

Suncenter liquid booster pump price manufacturers for safety valve calibration-2

◪ DGG Series Liquid Gas Booster Pumps  

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)
DGG6	6:1	3-8 bar	6XPL	48	NPT1/2	NPT1/2	29.91
DGG10	10:1	3-8 bar	10XPL	80	NPT1/2	NPT1/2	18.84
DGG16	16:1	3-8 bar	16XPL	128	NPT1/2	NPT1/2	12.42
DGG28	28:1	3-8 bar	28XPL	224	NPT1/2	NPT1/2	7.11
DGG40	40:1	3-8 bar	40XPL	320	NPT1/2	NPT1/2	4.89
DGG64	64:1	3-8 bar	64XPL	512	NPT1/2	NPT3/8	3.08
DGG80	80:1	3-8 bar	80XPL	640	NPT1/2	NPT3/8	2.44
DGG100	100:1	3-8 bar	100XPL	800	NPT1/2	NPT3/8	1.92

DGGD Series Liquid Gas Pumps(Double acting)

Suncenter liquid booster pump price manufacturers for safety valve calibration-3

◪ DGGD Series Liquid Gas Pumps(Double acting) 

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	3-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	3-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	3-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	3-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	3-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	3-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	3-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	3-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	3-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13

Suncenter DLS Series liquid gas filling booster pump system

SUNCENTER- Liquid gas filling pump systems are compact and delicacy solution tailored to customer specific requirements with air driven pumps as well as all accessories to be fitted and installed on the frame or in closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator. The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

As the pressure will be generated by means of a pneumatically operated pump，the electric connection will not be necessary. To operate this system, the air driven pump have to be equipped with the air control unit combined filter, pressure-regulating valve, pressure control gauge as well as manual relieve valve. In this operation, the pump will be mounted to the stainless steel tank in the closed cabinet in a compact and space saving manner. Pressure gauges, valves and pressure regulators will be fitted on panel.

Suncenter liquid booster pump price manufacturers for safety valve calibration-4

DLS liquid gas booster system = liquid gas booster pump+ following valves, gages, and parts

Suncenter liquid booster pump price manufacturers for safety valve calibration-5

The hottest selling- Model C cabinet picture

Suncenter liquid booster pump price manufacturers for safety valve calibration-6

◪ The standard gas booster pumps system including following parts:
◪ Air –driven liquid N2O/CO2/NOVEC/Refrigerant gas booster pump
◪ Stainless steel (carbon steel) material cabinet
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DLS-DGG6	6:1	3-8 bar	6XPL	48	G 1/2	NPT/ZG	29.91
DLS-DGG10	10:1	3-8 bar	10XPL	80	G 1/2	NPT/ZG	18.84
DLS-DGG16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	12.42
DLS-DGG28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	7.11
DLS-DGG40	40:1	3-8 bar	40XPL	320	G 1/2	NPT/ZG	4.89
DLS-DGG64	64:1	3-8 bar	64XPL	512	G 1/2	NPT/ZG	3.08
DLS-DGG80	80:1	3-8 bar	80XPL	640	G 1/2	NPT/ZG	2.44
DLS-DGG100	100:1	3-8 bar	100XPL	800	G 1/2	NPT/ZG	1.92

DLS-DGGD series Liquid gas booster system technical specification

Model	Pressure Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Driven air inlet port	High pressure Outlet port	MAX Flow (L/min)**
DLS-DGGD4	4:1	3-8 bar	4XPL	32	G 1/2	NPT/ZG	70.00
DLS-DGGD6	6:1	3-8 bar	6XPL	48	G 1/2	NPT/ZG	48.60
DLS-DGGD10	10:1	3-8 bar	10XPL	80	G 1/2	NPT/ZG	30.61
DLS-DGGD16	16:1	3-8 bar	16XPL	128	G 1/2	NPT/ZG	19.73
DLS-DGGD28	28:1	3-8 bar	28XPL	224	G 1/2	NPT/ZG	11.30
DLS-DGGD40	40:1	3-8 bar	40XPL	320	G 1/2	NPT/ZG	7.69
DLS-DGGD64	64:1	3-8 bar	64XPL	512	G 1/2	NPT/ZG	4.94
DLS-DGGD80	80:1	3-8 bar	80XPL	640	G 1/2	NPT/ZG	3.96
DLS-DGGD100	100:1	3-8 bar	100XPL	800	G 1/2	NPT/ZG	3.13

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter booster pump will automatically start, keep the loop pressure constant
※ Applicable for various kinds of gas such as N2O/CO2/NOVEC/Refrigerant etc.
※ For liquid gas(liquid+gas mixture) cylinder transfer/filling/recovery
※ For CO2 Fire Extinguisher filling 
※ For Supercritical CO2 extraction

video

Company Features
1. The position of Suncenter in booster pump price has improved greatly.
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd has built a world-class modern booster pump system factory with product sales and service networks all over the world.
3. Suncenter sticks to liquid co2 pumps first and co2 transfer pump on top principle. Please contact.

m******j

The quality of Suncenter booster pump system is ensured through a wide range of testing. These tests are for performance and durability, as well as, safety certifications, chemical, flammability testing, and sustainability. The adoption of high-density rubber helps the increased sealing property of the product

f******f

The design of Suncenter co2 transfer pump follows the many basic principles. They are mainly mechanical properties, static and dynamic structure, safety, cycle time and so on. The product is popular for its flame-resistant design

r******s

The components or parts used in Suncenter liquid co2 pumps are required to pass relevant requirements. They will be inspected or tested for strength, hardness, durability, and other mechanical properties using different testing methods. The product has a good electromagnetic screening effect

o******s

Strict production rules and regulations are always the core competitiveness of Suncenter booster pump price. With mature production technology and years of experience in the lighting industry, we are confident to provide customers with quality products. The electrolyte inside the product is not volatile, which contributes to relieving the pressure in the sealed environment

k******j

Suncenter co2 transfer pump complies with the requirements of safety standards. These standards are related to structural integrity, contaminants, sharp points&edges, small parts, mandatory tracking, and warning labels. The product can improve the stability of the electrocircuit effectively

j******b

This product can be printed with any information. It provides a clear space for printing necessary and readable information, such as key features, advantages, and raw materials. The product is extremely miniaturized, occupying little space

Mensagem do produto

*Nome

Telefone

*Correio electrónico

*Conteúdo