air over hydraulic pump pneumatic overseas market for metallurgy

latest_products

Instruções de bomba de teste de pressão manual

Bomba de teste de pressão hidráulica / hidro / hidrostática

Máquina de teste de medição externa do cilindro do gás com jaquetas de água

Bomba de injeção de reagente química pneumática

Informações sobre o produto
feedback

Enterprise Strength

Suncenter Fluid Control Equipment has a professional service team to provide quality and efficient services for customers.

Company Advantages
1. The manufacture of Suncenter air operated hydraulic pump involves some critical processes. These stages include concept confirmation, metal materials procurement, frame fabrication, components machining, surface painting, and final assembly.
2. Customers are greatly satisfied with the function of the product.
3. air over hydraulic pump has advantages both in cost, reliability and long life, in comparison with other similar products.
4. The qualify of work during the process will also lead to the high-quality air over hydraulic pump .
5. Dongguan Suncenter Fluid Control Equipment Co., Ltd has dynamic and talented technical workforce.

Compressed Air Driven Liquid Booster Pump-DGGD Series

We offer the most complete range of Air driven liquid pump models in the industry measured for:

Capability of ultimate pressure, flow or output horsepower.

Suncenter air operated hydraulic pump pneumatic for metallurgy-1

Compatibility with a broad variety of liquids, such as oil, water and chemical applications.

SUNCENTER pumps are air driven at a drive air pressure of 1bar to 8bar (14.5 psi to116 psi) by the normal air compressor. Basically the principle of operation is similar to a reciprocating amplifier where control of the piston at the end position is regulated by a pilot operated 4/2 way valve.

Suncenter pumps feature a large air piston joint to a smaller diameter plunger. The pressure ratio is the difference of these two areas and is the method of determining maximum outlet pressure. Higher pressures obtained by using higher pressure ratios.Suncenter model numbers reflect the pumps nominal pressure ratios， while the technical data indicates exact ratios. The outlet pressure is easily to set through a simple air regulator. By multiplying the pressure ratio by the available shop air pressure, the nominal liquid pressure can be calculated.

SUNCENTER pumps are self priming. In general it is not necessary to use an air line lubricator. The liquid to be pumped flows into the suction chamber by the up-stroke of the drive piston. By this suction effect, the inlet check valve is opened and the outlet check valve is closed. The down-stroke generates the pressure at the liquid side. The inlet check valve is closed and the outlet check valve is opened by the generated pressure. SUNCENTER liquid pumps cycle automatically, where the pressure is built up the numbers of cycles slow down, the pump stops automatically when the output pressure forces are equal. The pump restarts with a slight drop in the outlet pressure or an increase in the air drive pressure. Pump performance can be affected by a number of conditions, such as freezing of muffler or pilot valves (which is caused by moisture in air lines), inadequate inlet air line sizes and dirty filers. Don’t reduce the indicated port sizes and consult SUNCENTER for exact flow conditions not shown in charts.

Suncenter air operated hydraulic pump pneumatic for metallurgy-2

DGGD Series Liquid Pumps(Double acting, single air drive head)

Suncenter air operated hydraulic pump pneumatic for metallurgy-3

◪ They are characterized by the same features as the DGG pumps single acting, single air drive head types, but they have less pulsations and deliver approx. 50 % more flow.

Model	Pressure Boost Ratio	Driven air pressure PL	Formula to calculate outlet pressure	MAX Outlet Pressure(bar)*	Liquid inlet Connection	Liquid outlet Connection	MAX Flow (L/min)**
DGGD4	4:1	2-8 bar	4XPL	32	NPT1/2	NPT1/2	70.00
DGGD6	6:1	2-8 bar	6XPL	48	NPT1/2	NPT1/2	48.60
DGGD10	10:1	2-8 bar	10XPL	80	NPT1/2	NPT1/2	30.61
DGGD16	16:1	2-8 bar	16XPL	128	NPT1/2	NPT1/2	19.73
DGGD28	28:1	2-8 bar	28XPL	224	NPT1/2	NPT1/2	11.30
DGGD40	40:1	2-8 bar	40XPL	320	NPT1/2	NPT3/8	7.69
DGGD64	64:1	2-8 bar	64XPL	512	NPT1/2	NPT3/8	4.94
DGGD80	80:1	2-8 bar	80XPL	640	NPT1/2	NPT3/8	3.96
DGGD100	100:1	2-8 bar	100XPL	800	NPT1/2	NPT3/8	3.13
DGGD130	130:1	2-8 bar	130XPL	1040	NPT1/2	M14*1.5	2.40
DGGD175	175:1	2-8 bar	175XPL	1400	NPT3/8	M14*1.5	1.81
DGGD255	255:1	2-8 bar	255XPL	2040	NPT1/4	M14*1.5	1.23
DGGD400	400:1	2-8 bar	400XPL	3200	NPT1/4	M14*1.5	0.79

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar
※ No airline lubricator required
※ Pressures to 640Mpa (6400 bar)
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant

video

Company Features
1. In virtue of a well-grounded development foundation, Dongguan Suncenter Fluid Control Equipment Co., Ltd has become a first-class air operated hydraulic pump manufacturing enterprise.
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd has a group of skilled workers and a complete product line.
3. Suncenter Fluid Control Equipment's longing for growth is deeply rooted. Please contact. Dongguan Suncenter Fluid Control Equipment Co., Ltd will constantly pay attention to the commercial mode and advocate innovation spirits. Please contact. Dongguan Suncenter Fluid Control Equipment Co., Ltd will keep developing new products to upgrade its reputation and popularity. Please contact.

s******c

The electrolyte used in Suncenter air over hydraulic pump is scrutinized. Any inferior electrolyte which easily volatilizes and leaks under high temperature is weeded out. For now, Polyva has applied for 9 invention patents including 5 utility patents

n******a

Suncenter air operated hydraulic pump hits all the high points in CertiPUR-US. No prohibited phthalates, low chemical emission, no ozone depleters and everything else for which CertiPUR keeps an eye out. Water- soluble packaging machine is highly automatic and intelligent with touch screen operation

k******d

Suncenter air over hydraulic pump is the outcome of high quality. It's manufactured strictly complying with the quality, safety and security standards in the mobile phone accessories industry. The performance of our water-soluble PVA film for laundry detergent products has reached internationally advanced level

u******d

Suncenter air over hydraulic pump is tested with great rigor. Requirements and functionalities stipulated in product planning are crucial determining factors when it comes to the necessary tests. Our film has good flexibility, the effective isolation of various substances and rapid dissolution of water

d******a

Inspection of Suncenter air operated hydraulic pump will be carried out by the QC team. Its appearance will be inspected to make sure the identification of polarity is correct and the battery lead is finely handled. Our film has good flexibility, the effective isolation of various substances and rapid dissolution of water

u******y

air over hydraulic pump not only has good water resistance and temperature resistance but also does not lose its effect in harsh environments. It is of good aging resistance and tear resistance, and is not easily damaged.

Mensagem do produto

*Nome

Telefone

*Correio electrónico

*Conteúdo