high quality pressure booster pump system type for safety valve calibration

Gas booster pressure test bench

Suncenter - Air/Gas pressure test bench are compact and delicacy solution tailored to customer specific requirements with gas(air) boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator.

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option.

high quality pressure booster pump system type for safety valve calibration-1

The hottest selling- Model C frame type cabinet picture

high quality pressure booster pump system type for safety valve calibration-2

◪ The standard gas booster pumps system including following parts:
◪ Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)
◪ Stainless steel (carbon steel) material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

high quality pressure booster pump system type for safety valve calibration-3

◪ DGS series air/gas pressure test bench with round chart recorder

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGA02	2：1	1.0	16	16	2-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGS-DGA05	5：1	0	40	40	2-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGS-DGA10	10：1	3.5	80	80	2-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGS-DGA25	25：1	7.0	200	200	2-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGS-DGA40	40：1	10	320	320	2-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGS-DGA60	60：1	20	480	480	2-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGS-DGA100	100：1	25	800	800	2-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )
DGS-DGA130	130：1	35	800	1040	2-8 bar	130XPL	1/4/ M14X1.5	120(at PA of 40 bar )

Technical specification for DGS-DGD series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGD10	10:1	3.5	80	80	2-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGS-DGD25	25:1	10	200	200	2-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGS-DGD40	40:1	15	320	320	2-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGS-DGD60	60:1	25	480	480	2-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGS-DGD100	100:1	35	800	800	2-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )

Technical specification for DGS-DGT series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGT25	25:1	0.1	10	200	2-8 bar	25XPL+3.5XPA	1/4/ 1/4	136(at PA of 8 bar )
DGS-DGT40	40:1	0.1	10	320	2-8 bar	40XPL+ 6XPA	1/4/1/4	124(at PA of 8 bar )
DGS-DGT10/60	10:1/60:1	0.1	10	480	2-8 bar	60XPL+6X PA	1/4/1/4	84(at PA of 8 bar )
DGS-DGT25/60	25:1/60:1	10	25	480	2-8 bar	60XPL+2.5XPA	1/4/1/4	80(at PA of 15 bar )
DGS-DGT100	100:1	0.1	10	800	2-8 bar	100XPL+10XPA	1/4/ M14*1.5	63(at PA of 8 bar )

video

j******z

The fabrics used in Suncenter hydraulic pump test bench comply with global organic textile standards. They are certified by Oeko-Tex. The built-in cooling fan protects this product form overheat

j******n

The design of Suncenter pressure booster pump is the application of various disciplines. They include mathematics, kinematics, statics, dynamics, mechanical technology of metals and engineering drawing. The product has passed the global certifications such as safety standard: IEC/EN61558

g******e

The design of Suncenter hydraulic pump test bench is professional. It is completed by our professional designers who always follow the latest trends in furniture design. With its compact design, the product is portable

i******n

The design of Suncenter hydraulic pump test bench complies with the universal law in furniture modeling design field. The design integrates both variations and unity, such as the contrast between light and dark and the unification of style and lines. Using high quality cables, the product features great conductivity

o******n

Various cutting-edge machines are used in Suncenter pressure booster pump manufacturing. They are laser cutting machines, spraying equipment, surface polishing equipment, and CNC processing machine. Featuring automatic thermal cut-off function, the product will not accumulate too much heat

r******k

The QC team is highly responsible for the quality of the product. The product has met the needs of low ripple without decreasing of the dynamic performance

Mensagem do produto

*Nome

Telefone

*Correio electrónico

*Conteúdo