high quality gas booster booster free design for safety valve calibration

Company Advantages
1. Different energy conservation technologies are used in the development of Suncenter oxygen booster pump . Frequency conversion, suppression of electric surge, or electromagnetic regulation technology has been adopted to make full use of electricity. The speed of this product can be adjusted steplessly
2. With its highly recognized features, the product is deeply trusted by our customers. This product features energy saving and environmental protection
3. It features a high load-bearing capacity. The high-strength materials allow it to offer the stability required for the perfect, long-term staging of merchandise. It can be used for a broad variety of liquids, such as oil, water, and chemical
4. This product is labeled as water-repellent, which is mainly contributed by its quality waterproof coatings which feature higher waterproofing ratings. Its seal systems are designed for a long working life

Compressed Air Driven Gas Booster Pump- DGT Series

Suncenter Air Driven Gas Boosters provide for pressures up to 80Mpa (11,600 psi). Used for virtually all known gases, these boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging. Key features include:

Applications for Air Driven Gas Boosters

SUNCENTER Air Driven Gas Boosters provide for pressures up to 80Mpa. Used for oil free compression not only of air or Nitrogen, but also flammable and risk gases like hydrogen, oxygen and natural gas. These boosters are ideal for increasing gas pressure, transferring high pressure gas, charging cylinders and scavenging.

Air driven boosters are an efficient alternative instead of electrically driven products and can be used in explosion- proof areas.

As a result of the wide range of models it is possible to select the optimum booster for each application. Single stage, double acting or two stage boosters or a combination of these models can be used to achieve different operating pressures and flow capacities.

SUNCENTER Air Driven Gas Boosters are ideal and widely used for hydrostatic and burst testing for valves, pipes, tubing and pressure vessels; Calibration for safety valves; Automobile regulator detecting and telecommunication cable inflatable appliances.

high quality gas booster booster free design for safety valve calibration-1

DGT series gas booster pumps(Double acting, double stage, single air drive head ):

high quality gas booster booster free design for safety valve calibration-2

◪ DGT pumps are double acting, double stage with single air drive head pumps. They can provide for super high pressure with very low inlet pressure.  
◪ DGT pumps are available with high quality seals, which provide significantly better service life  
◪ All parts in contact with the gas are made of stainless steel. 

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
DGT15	15:1	0.1	56	120	2-8 bar	15XPL	3/8/ 1/4	230(at PA of 8 bar )
DGT25	25:1	0.1	10	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGT7/25	25:1	5	56	200	2-8 bar	25XPL	3/8/ 1/4	156(at PA of 8 bar )
DGT40	40:1	0.1	10	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGT15/40	40:1	5	120	320	2-8 bar	40XPL	3/8/ 1/4	124(at PA of 8 bar )
DGT60	60:1	0.1	10	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGT15/60	60:1	6	120	480	2-8 bar	60XPL	3/8/ 1/4	80(at PA of 15 bar )
DGT100	100:1	0.1	10	800	2-8 bar	100XPL	3/8/ 1/4	63(at PA of 8 bar )

2DGT series gas booster pumps(Double acting, double stage,double air driven heads ):

high quality gas booster booster free design for safety valve calibration-3

◪ 2DGT series gas booster pumps(Double acting, double stage,double air driven heads ) 

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (NPT thread)	Max. flow at driven air pressure of 6bar (L/min)
2DGT7/15	15:1	4	56	120	2bar-8 bar	15XPL	3/8 / 3/8	430(at PA of 10 bar )
2DGT7/25	25:1	5	56	200	2bar-8 bar	25XPL	3/8 / 3/8	300(at PA of 10 bar )
2DGT15/40	40:1	7	120	320	2bar-8 bar	40XPL	3/8 / 3/8	180(at PA of 10 bar )
2DGT15/60	60:1	7	120	480	2bar-8 bar	60XPL	3/8 / 3/8	120(at PA of 10 bar )

features

※ Compressed Air driven - no electricity required (connect to normal air compressor)
※ In order to extend the lifetime of the pump, the driving air pressure should not be higher than 8 bar 
※ No airline lubricator required
※ Hydrocarbon free - separation between air and gas sections
※ Pressures to 80Mpa (11,600 psi)
※ Wide range of models with different ratios
※ Built-in-cooling on most models
※ Easy to install, operate and maintain
※ Best price / performance ratio
※ No heat, flame or spark risk and explosion proof  
※ Automatic pressure holding, whatever the cause of the pressure drop, the Suncenter pump will automatically start, keep the loop pressure constant 
※ Applicable gas:Air/Ar(Argon)/He(Helium)/H2(Hydrogen)/O2(Oxygen)N2(Nitrogen) CO2/NO2/CH4/C2H2/LNG/LPG/CNG/FM200/SF6/H2S etc

video

Company Features
1. We have a number of technical backbones with many years of professional manufacturing experience. They have provided successful guidance on many clients' projects.
2. We have an environmental-friendly production concept on the mind. We are looking for cleaner materials and create sustainable alternatives to the current packaging materials. All of our production processes are stepping forward a more environmentally acceptable way.

l******k

The raw materials of Suncenter gas booster are extracted with the help of various technology. The advanced digging technology and the environmental control systems for managing airflow, water flow, and temperature guide the whole preliminary process. It can be tailored to meet the specific requirements of customers

q******k

The electrolytes of Suncenter oxygen booster pump are well treated to have high ionic conductivity and good wetting characteristics, particularly for high power applications. The product is suitable for most liquids and liquefied gases

a******e

Suncenter gas booster is checked by conducting on-site testing including marking and vulcanization tests for rubber outsoles, rocking tests, fabric testing and verification of special features like waterproofing and stain resistance. The product is easy to maintain and helps improve productivity

i******q

Different high technologies are used in the production of Suncenter gas booster. In order to enhance its adjusting ability and compatibility with the power grid, it makes full use of the comprehensive technical support technology for solar power generation. Its operation is safe with no heat, flame or spark risk

c******c

Suncenter gas booster has undergone a series of the assessment process in terms of its sizes (width, height, length), colors, and resistance to environmental conditions (rain, wind, snow, sand storms, etc.) It helps save costs and prevent contamination

a******g

The product is durable. The encapsulation material of the battery is manufactured with high quality to enhance cell performance and provide a longer service life. This product features energy saving and environmental protection

Mensagem do produto

*Nome

Telefone

*Correio electrónico

*Conteúdo