easy to use hydraulic test bench gas type for pressurization

Company Advantages
1. Suncenter pneumatic test bench is constantly inspected. It is checked for issues in stitching, including conducting seam strength tests and checks for fraying, skipped stitches, open stitches, crooked stitches, and puckered seams. This product has the advantages of speed and efficiency
2. The product offers the potential for patients to receive more comprehensive healthcare faster and quickly from healthcare practitioners. Its operation is safe with no heat, flame or spark risk
3. hydraulic test bench is equipped with an advanced heat exchanger to greatly improve the heat exchange efficiency of the evaporator. Moreover, it has a variety of protection functions. It is of good durability and reliable safety.
4. hydraulic test bench is equipped with an advanced heat exchanger. This increases the heat exchange area, enhances fluid perturbation, and effectively improves heat transfer efficiency.
5. hydraulic test bench is equipped with a high-quality compressor. It has anti-aging and anti-carbonization properties. It is not easy to get damaged under high-pressure and high-temperature conditions.

Gas booster pressure test bench

Suncenter - Air/Gas pressure test bench are compact and delicacy solution tailored to customer specific requirements with gas(air) boosters as well as all accessories to be fitted and installed in the frame or a closed cabinet.

To operate this system, the pressure gauges, valves and pressure regulators have to be fitted on panels. The outlet pressure is easily to be set through a simple air regulator.

The pump stops automatically when this end pressure is reached and restarts with a slight drop in the outlet pressure or an increase in the air drive pressure.

Operating pressure up to 80 MPa, for higher pressure, pump with double driven heads is an ideal option.

easy to use hydraulic test bench gas type for pressurization-1

The hottest selling- Model C frame type cabinet picture

easy to use hydraulic test bench gas type for pressurization-2

◪ The standard gas booster pumps system including following parts:
◪ Air –driven gas booster pump (DGA/DGD/DGT three series for choosing)
◪ Stainless steel (carbon steel) material cabinet (Three models for choosing)
◪ F.R.L combination for driven air (adjusts air pressure, add lubricating oil and water filter)
◪ Driven air switch (Pump starting switch), driven air pressure gauge
◪ Gas inlet switch, Gas inlet pressure gauge
◪ Gas outlet switch, Gas outlet pressure gauge, unloading valve, interconnecting pipes etc.
◪ And we could also customize it according to clients’ special requirement.

easy to use hydraulic test bench gas type for pressurization-3

◪ DGS series air/gas pressure test bench with round chart recorder

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGA02	2：1	1.0	16	16	2-8 bar	2X PL	1/2 / 1/2	960 (at PA of 6 bar )
DGS-DGA05	5：1	0	40	40	2-8 bar	5XPL	1/2 / 1/2	680(at PA of 6 bar )
DGS-DGA10	10：1	3.5	80	80	2-8 bar	10XPL	3/8/ 3/8	210(at PA of 10 bar )
DGS-DGA25	25：1	7.0	200	200	2-8 bar	25XPL	1/4/ 1/4	120(at PA of 20 bar )
DGS-DGA40	40：1	10	320	320	2-8 bar	40XPL	1/4/ 1/4	200(at PA of 40 bar )
DGS-DGA60	60：1	20	480	480	2-8 bar	60XPL	1/4/ 1/4	180(at PA of 40 bar )
DGS-DGA100	100：1	25	800	800	2-8 bar	100XPL	1/4/ M14X1.5	136(at PA of 40 bar )
DGS-DGA130	130：1	35	800	1040	2-8 bar	130XPL	1/4/ M14X1.5	120(at PA of 40 bar )

Technical specification for DGS-DGD series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGD10	10:1	3.5	80	80	2-8 bar	10XPL+ PA	3/8/3/8	410(at PA of 6 bar )
DGS-DGD25	25:1	10	200	200	2-8 bar	25XPL+ PA	1/4/1/4	396(at PA of 20 bar )
DGS-DGD40	40:1	15	320	320	2-8 bar	40XPL+ PA	1/4/1/4	320(at PA of 40 bar )
DGS-DGD60	60:1	25	480	480	2-8 bar	60XPL+ PA	1/4/1/4	215(at PA of 40 bar )
DGS-DGD100	100:1	35	800	800	2-8 bar	100XPL+ PA	1/4/M14*1.5	300(at PA of 60 bar )

Technical specification for DGS-DGT series

Model	Pressure boost ratio	Min. gas Inlet pressure PA (bar)	Max.gas Inlet pressure PA (bar)	Max. gas outlet pressure PB (bar)	Driven air pressure PL	Formula to calculate gas outlet pressure PB	Connection: Gas Inlet / Gas outlet (ZG thread)	Max. flow at driven air pressure of 6bar (L/min)
DGS-DGT25	25:1	0.1	10	200	2-8 bar	25XPL+3.5XPA	1/4/ 1/4	136(at PA of 8 bar )
DGS-DGT40	40:1	0.1	10	320	2-8 bar	40XPL+ 6XPA	1/4/1/4	124(at PA of 8 bar )
DGS-DGT10/60	10:1/60:1	0.1	10	480	2-8 bar	60XPL+6X PA	1/4/1/4	84(at PA of 8 bar )
DGS-DGT25/60	25:1/60:1	10	25	480	2-8 bar	60XPL+2.5XPA	1/4/1/4	80(at PA of 15 bar )
DGS-DGT100	100:1	0.1	10	800	2-8 bar	100XPL+10XPA	1/4/ M14*1.5	63(at PA of 8 bar )

video

Company Features
1. With years of experience, Dongguan Suncenter Fluid Control Equipment Co., Ltd has been regarded as a highly qualified manufacturer in China. We specialize in manufacturing hydraulic test bench . With the technical force's help, our pressure booster pump is of highly excellent quality.
2. Dongguan Suncenter Fluid Control Equipment Co., Ltd bases itself on independent research and development and independent innovation.
3. It is clear that nitrogen pumps is made by the most advanced staff utilizing high-end technology. Working on supplying the finest hydrostatic pressure test and professional service will facilitate Suncenter to move forward. Call!

m******r

In order to shore up the position of Suncenter, it is also necessary to design hydraulic test bench. It brings a smooth and noise reduced running

b******w

hydrostatic pressure test take precedence over other similar products due to its hydraulic test bench design. It has large advertising panels for in-house promotion or can be rented to third parties

y******m

All shapes of hydrostatic pressure test can be adjusted according to customers' demands. It brings a smooth and noise reduced running

p******x

Unlike other similar products, our pressure booster pump is made by pressure booster pump. Its metal parts are electropolished for being robust and corrosion-resistant

w******o

hydrostatic pressure test is well-known in global market for its design of hydraulic test bench. It is designed to be lightweight and supportive

z******m

Excellent hardness and elongation are its advantages. It has gone through one of the stress-strain tests, namely, tension testing. It will not break with increasing tensile load. It can be kept on a ramp near the terminal when not in use for quick accessibility

Mensagem do produto

*Nome

Telefone

*Correio electrónico

*Conteúdo